Water Stop

Water Stop

DESCRIPTION:
Acrylic emulsion based, water proofing sealer for roofs.

PROPERTIES:
Developed for roof and water insulation. Semi-fluid property provides covering the surface easily. High water vapour permeability, allowing building to breathe. It is %600 elastic. Maintains the elasticity under hot and cold differences. 24 hours later, tensile strenght is 25 kgf/cm² at 25°C. It has high resistance against sunlight, humidity, alkali. It provides decorative appearance, good adhesion and water resistant.

APPLICATION AREA:
Exterior concrete, plaster, ytong, brick, fiber cement, wood, roof boarding plates, roofs and terraces.

APPLICATION TYPE:
Surface Preparation: Dirt, grease, old loose or flaking materials must be removed from the surfaces. Never use isolation primer.
Application:
It should be diluted with 40% (by volume) of water for application of the first priming coat with brush or roller. Apply min. 2-3 coats undiluted. Each coat must be applied in opposite direction of the previous coat. The surfaces on which Dekorsan Water Stop is applied should be protected against rain, snow and frost during a period of 24 hours. The surfaces on which it is to be applied should be sufficiently inclined so that water accumulation is not allowed.

SPREADING RATE:
Depending on the surface; 0,70-0,90 m²/L and 0,50-0,66 m²/kg.

SAFETY PHRASES:
Keep out of the reach of children.